INSTALLATION TIP: When removing the factory coil cover you can use a set of vice grips holding a 10mm socket. This will allow you to leave the cowl cover in place.
Since releasing our original K-Tuned Coil Pack Cover several years ago we have seen a lot of replicas pop up. I guess we must have done something right, so we are back it again and have redesigned the cover for the newer model Honda K24Z Series engines. This fitment is easily identified by the circular moon cut that is needed in order to clear the oil cap. The cover is finished in a wrinkle black powder coating and fits flush on top of the factory valvecover to hide the ugly coils below. We have included 2 different sets of spacers to ensure a proper flush fit. One set is used with a completely stock engine harness and the second set is used if the plastic cover on the coil plug area is removed. Zinc plated hardware is included: 2 small spacers, 2 larger spacers, 2 button head bolts and a 5/32 allen key. Our optional K-Tuned Billet Logo Plate can also be bolted in place to add a more detailed look.